• 5 Bar (75psi) Absolute presure. Can handle 4bar boost pressure and down to full vacuum
• For use as a MAP Sensor for aftermarket control systems
• High quality and the house is of stainless steel
• Withstands high temperatures and vibrations
• +5 Volt supply voltage
• 1/8 NPT thread
• Electrical contact with wire included
• Can also handle fuel and oil
• Linear curve with output signal between 0.5-4.5 volts
• 0.5 volt = 0 kPa (0 PSI) (0 bar absolute pressure) (Vacuum)
• 4.5 volts = 500 kPa (75 PSI) (5 bar absolute pressure) (4 bar boost pressure)
• Connection Black = sensor ground pin 1. Red = 5v + pin 2. White = Output pin 3

If you have a control system that needs to be set to 0 and 5 volts, use the following values:

• 0 volts = -24.075 psi
• 5 volts = 69.675 psi
• Pressure = 18.75 * volts - 24.075