Turbocharge your engine cooling with the Davies, Craig EWP®130 alloy Electric Water Pump. Like all the EWPs, this unit is designed for universal engine fitment, to satisfy those larger and higher horsepower, turbocharged, supercharged and ‘worked’ engines which develop excessive heat. The EWP®130 configuration mirrors the highly successful EWP®80 which offers a numerous selection of attachment options, including elbow and straight adaptors which can be bolted on to both the inlet and outlet for simple remote engine mounting.
The EWP®130 will be supplied with one each of the 35mm (1⅜”) straight and elbow alloy adaptors, ‘O’ rings and mounting hardware along with two 3mm (⅛”) rubber adaptor sleeves. The respective 38 mm (1½”) alloy adaptors and 6mm (¼”) rubber adaptor sleeves are optional.
This rugged alloy hi-flow electric water pump is designed to complement or replace the engine’s existing mechanical water pump. This essential performance product increases power to your vehicle’s drive wheels and improves coolant temperature
control. By removing the parasitic power losses of belt-driven water pumps, the EWP®130 releases up to 10kW (13hp) of extra power, increased torque and fuel savings.
Technical Specifications |
Voltage | 12 Volt Pump |
Operating voltage | 3V DC to 15V DC |
Maximum current | 10A @ 13V |
Flow rate (max) | 130 L/min (34.34 US gal/min) @ 13V DC |
Operating temp. | -40° to 130°C (-40° to 266°F) |
Pump design | Clockwise centrifugal with volute chamber |
Pump weight | 1,226grams (2.7 lb) |
Pump material | Aluminium (Powder Coated) |
Burst pressure | 500 kPa (72.5 psi) |
Seal | Ceramic face seal |
Self Priming | No, none of our pumps are self-priming |
Fits hose sizes | 35mm to 51mm (1⅜” to 2”) |
EWP130 Alloy 12 Volt Pump | 1 |
Alloy elbow adaptor - 35mm (1⅜”) | 1 |
Alloy straight adaptor - 35mm (1⅜”) | 1 |
Hose Clamps | 2 |
Rubber adaptor sleeve - 3mm (⅛”) | 1 |
O ring | 2 |
Wiring Harness | 1 |
Adapter Rubber Sleeves 3mm | 2 |