The EWP®115 pump is suitable for small, medium, large, high- performance and 4WD vehicles. It’s a performance product that improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy.
The EWP®115 is a practical alternative to the mechanical belt-driven pump or fitted as an auxiliary pump. Mechanical belt-driven water pumps run directly off the motor and sap engine power … the EWP®115 is hardwired into your electrical system, by-passing the engine and releasing up to an additional 10kw (13hp). Our EWP range are also extensively used in Intercooler Applications.
| KIT CONTENTS |
| PART DESCRPTION | UNITS |
EWP®115 Nylon 12V | 1 |
EWP® Basic Wiring Harness | 1 |
Hose Clamps | 2 |
| RED - Wire Joiner | 1 |
| RED - 6mm Ring Terminal | 1 |
| RELAY - 12V 40 Amp 5 Pin W/- Resistor Protection | 1 |
SCREW - SELF TAP 8X3/8 BZ | 1 |
TECHNICAL SPECIFICATIONS |
Voltage | 12 Volt Pump |
Operating voltage | 3V DC to 15V DC |
Maximum current | 10A @ 13V |
Flow rate (max) | 139 L/min (36.7 US gal/min) @ 13V DC |
Operating temp. | -40° to 120°C (-40° to 248°F) |
Pump design | Clockwise centrifugal with volute chamber |
Pump weight | 920 grams (2.03 lb) |
Pump material | Nylon 66 - 30% Galss Filled |
Burst pressure | 500 kPa (72.5 psi) |
Seal | Ceramic face seal |
Self Priming | No, none of our pumps are self-priming |
Fits hose sizes | 35mm to 51mm (1⅜” to 2”) Push on Fittings |
Push-On fitting Size | EWP Inlet & Outlet 38mm - with 3mm Sleeve (#8510) 44mm
- with 6mm Sleeve (#8511) 51mm
|
Same day shipping
Same day shipping 
